32 mm Midrange CB (Captive Ball) Track is made of tough 6061-T6 aluminum that is Hardcote-anodized black with Teflon impregnation for durability and easy bearing movement. It comes in both low- and high-beam configurations.Use standard low-beam track when it is supported at each fastener hole. Pinstop holes are spaced every 100 mm (3-15/16"), between the fasteners; first fastener hole is 50 mm (1-15/16") from the end of the track. Retrofit low-beam track is designed as a direct replacement for older track designs (like Nicro Fico) with 4" spaces between fastener holes; first hole is 2" from the end of the track.
When end controls are not used, add HAR #E3200 or #562 endstops to absorb shock loads (sold separately)
When end controls assemblies are used, trim caps can be used to finish the track ends
Splice links help align track sections during installation
Fasteners: 5/16"FH retrofit track
Can be bent to your specifications, please call for details
Minimum bend radius for both Low- and High-Beam R32 Track: 2.44m (8ft) for standard/short cars, and coupled short cars; 5.49m (18 ft) for HL/long cars, and coupled long cars; 7.32m (24 ft) for 9-1/8" double toggle single cars
Note: Due to its length, track over 3.5m (9 ft) in length must be shipped via truck or air freight