32 mm Midrange CB (Captive Ball) Track is made of tough 6061-T6 aluminum that is Hardcote-anodized black with Teflon impregnation for durability and easy bearing movement. It comes in both low- and high-beam configurations.
Use high-beam track when it must span a cockpit or other unsupported area. Refer to the 32 mm High-Beam Track Spanning Chart on our website for details. The high-beam track has an internal channel for mounting bolts that are held by rectangular slides (washers). The sliding mounting bolts allow this track to be easily retro-fitted to an existing hole pattern. It has no pinstop holes.
When end controls are not used, add HAR #E3200 or #562 endstops to absorb shock loads (sold separately)
When end controls assemblies are used, trim caps can be used to finish the track ends
Splice links help align track sections during installation
Fasteners: 5/16"HH high-beam track
Can be bent to your specifications, please call for details
Minimum bend radius for both Low- and High-Beam R32 Track: 2.44m (8ft) for standard/short cars, and coupled short cars; 5.49m (18 ft) for HL/long cars, and coupled long cars; 7.32m (24 ft) for 9-1/8" double toggle single cars
Note: Due to its length, track over 3.5m (9 ft) in length must be shipped via truck or air freight