Cole Hersee 24200-BX - 12V, 110A Latching Solenoid
Continuous Duty Solenoid for 12 VDC Systems
Designed for low duty cycle applications, such as electrically contolled water valves. These solenoids are activated via an On-Off-On momentary switch and incorporate a set of permanent magnets which hold the plunger in the closed position, even when no power is being applied. Thus, depending on the polarity of the power applied, these solenoids remain in either the open or closed position, without the need for continuous power or its resulting heat production.
Continues to hold, even after the power is disconnected
Requires less than 3.5 amps to operate
Compact: mounts in tight locations
No heat generated: coil taken out of circuit
Electrical rating: 110 amps continuous (carry only)
Case: plated steel
Terminals: small 10-32 thread, large 5/16"-24 thread, hex nuts and lockwashers included
Bracket mounting holes: .281" x .310", 2.20" on center